Prototype Perkakas Mekanik Berbasis Benda Kerja Praktik Mahasiswa

Authors

  • Abdul Tahir Akademi Teknik Soroako
  • Edi Rande Padang Akademi Teknik Soroako
  • Harjuma Harjuma Akademi Teknik Soroako
  • Fitriana Firdaus Akademi Teknik Soroako

DOI:

https://doi.org/10.55123/insologi.v2i1.1655

Keywords:

Vocational, Practical, Economic, Machines, Manufacturing

Abstract

The learning process for vocational higher education applies a composition of 30 percent theory and 70 percent practice. A larger composition of practical learning will guarantee an increase in the quality of students' expertise, because in practical learning students practice in workshops that produce workpieces in the form of products that have economic value. Workpieces are made by manufacturing processes using industrial-based machines such as lathes, milling machines, drills, grinders, and others. Practical work in the workshop is carried out for one week or the equivalent of 38 hours. The quality of the workpiece is also a parameter for student assessment which will become one of the semester graduation requirements so as to produce quality students in their fields. However, there are problems in practicum activities in the vocational field that are most experienced by almost all vocational education institutions, namely workpiece waste. Vaccination education managers must think about how to optimize or utilize work objects resulting from student practice. Not a few students' work is ignored or thrown away and not utilized. This is the background of this research. This study aims to make mechanical device products that have economic value by utilizing students' work. The product manufacturing method begins with data collection, planning and drawing, the manufacturing process, assembling, and testing. From the results of the tool making, 4 types of prototype products were obtained, namely table vise, bending tools, C clamps, mini press tools. From the four products made, it can be concluded that the tool manufacturing process went according to plan and optimal results were obtained.

Downloads

Download data is not yet available.

References

Anam, C. (2021). Analisis Kesiapan Pendidikan Vokasi Dalam Menyongsong Pembelajaran Tatap Muka Di Masa Pandemi Covid 19 (Studi Kasus di LP3I Malang). Jurnal Vokasi, 5(2), 112. https://doi.org/10.30811/vokasi.v5i2.2313

Arisandi, D., Setiawan, D., & Yantony, D. (2022). Perancangan dan Pembuatan Alat Uji Geometrik. Jurnal Vokasi Teknik Mesin Dan Fabrikasi Logam, 1(1), 39–46.

Gunawan, I., Yuwana, Y., & Raharno, S. (2012). Spesifikasi Ulir Trapesium Pada Produk Standar Ragum Meja Polman Tipe -125 . Seminar Nasional Teknologi Manufaktur, 1–6.

Harman, H., Jasman, J., & Israkwaty, I. (2022). Perancangan Perahu Pemungut Sampah Plastik yang Mengapung di Pesisir Danau Matano. METANA, 18(1), 7–13. https://doi.org/10.14710/metana.v18i1.42267

M, S., Jamaluddin, J., Aslim, A., & Satra, A. (2022). Perancangan Alat Press Material Komposit Menggunakan Sistem Pneumatik. ILTEK : Jurnal Teknologi, 17(02), 94–100. https://doi.org/10.47398/iltek.v17i02.18

Muhammad Yanis, Gunawan, & Pratama, R. W. (2021). Perancangan dan Pembuatan Mesin Bending dan Notching. Jurnal Rekayasa Mesin, 21(1), 33–38. https://doi.org/10.36706/jrm.v21i1.72

Prianto, M. E. E. (2017). Proses Permesinan Cnc Dalam Pembelajaran Simulasi CNC. Jurnal Edukasi Elektro, 1(1). https://doi.org/10.21831/jee.v1i1.15110

Satito, A., Sutadi, L., Harmanto, S., & Rahayu, S. S. (2020). Rancang Bangun Prototipe Ragum Presisi Tanpa Poros Ulir Untuk Pengayaan Materi Praktik Laboratorium Pemesinan . Prosiding Seminar Hasil Penelitian Dan Pengabdian Masyarakat, 930–937.

Sirama, Jasman, & Harman. (2022). Rancang Bangun Alat Bantu Penekuk Besi Beton Manual. Jurnal Vokasi Teknik Mesin Dan Fabrikasi Logam, 1(1), 21–29.

Ulfa Sholihannisa, L., & Juliawati, P. (2020). Manajemen Pembelajaran Model Block System Learning Pada Pendidikan Tinggi Vokasi Di Politeknik LP3I. TEMATIK, 7(1), 21–37. https://doi.org/10.38204/tematik.v7i1.368

Widianto, A. K. M. (2021). Pengembangan Media Audio Visual Simulasi Setting Mesin Cnc Turning Untuk Meningkatkan Hasil Belajar Pengetahuan Pembubutan Rata. Jurnal Pendidikan Teknik Mesin, 21(1), 10–15.

L. Suriani, “Pengelompokan Data Kriminal Pada Poldasu Menentukan Pola Daerah Rawan Tindak Kriminal Menggunakan Data Mining Algoritma K-Means Clustering,” Jurnal Sistem Komputer dan Informatika (JSON), vol. 1, no. 2, p. 151, 2020.

I. N. M. Adiputra, “Clustering Penyakit Dbd Pada Rumah Sakit Dharma Kerti Menggunakan Algoritma K-Means,” INSERT : Information System and Emerging Technology Journal, vol. 2, no. 2, pp. 99–105, 2022.

Downloads

Published

2023-02-28

How to Cite

Tahir, A., Edi Rande Padang, Harjuma, H., & Fitriana Firdaus. (2023). Prototype Perkakas Mekanik Berbasis Benda Kerja Praktik Mahasiswa. INSOLOGI: Jurnal Sains Dan Teknologi, 2(1), 210–220. https://doi.org/10.55123/insologi.v2i1.1655

Issue

Vol. 2 No. 1 (2023): Februari 2023

Section

Articles

License

Copyright (c) 2023 Abdul Tahir, Edi Rande Padang, Harjuma Harjuma, Fitriana Firdaus

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

Hak cipta pada setiap artikel adalah milik penulis.
Penulis mengakui bahwa INSOLOGI (Jurnal Sains dan Teknologi) sebagai publisher yang mempublikasikan pertama kali dengan lisensi Creative Commons Attribution 4.0 International License.
Penulis dapat memasukan tulisan secara terpisah, mengatur distribusi non-ekskulif dari naskah yang telah terbit di jurnal ini kedalam versi yang lain, seperti: dikirim ke respository institusi penulis, publikasi kedalam buku, dan lain-lain. Dengan mengakui bahwa naskah telah terbit pertama kali pada INSOLOGI (Jurnal Sains dan Teknologi).