Clustering Production of Plantation Crops by Province Using the K-Means Method

Authors

  • Azhari Abdillah Simangunsong STIKOM Tunas Bangsa, Pematangsiantar, Indonesia
  • Indra Gunawan STIKOM Tunas Bangsa, Pematangsiantar, Indonesia
  • Zulaini Masruro Nasution STIKOM Tunas Bangsa, Pematangsiantar, Indonesia

DOI:

https://doi.org/10.55123/jomlai.v1i4.1661

Keywords:

Production Result, K-Means, Clustering, Province, Plantation Crops

Abstract

The purpose of this research is to classify the results of plantation crop production each year based on provinces in Indonesia, so that it can be known which provinces produce the most plantation crop production and which produce less. In this study using the K-Means Algorithm Data Mining technique. The data source for this research was collected based on plantation data obtained from the Indonesian Central Bureau of Statistics (BPS). The data used is data from 2018-2020 which consists of 34 provinces. The results of this study are groupings which are divided into 3 Clusters, namely low Clusters, medium Clusters, and high Clusters. Based on the results of calculations using the K-Means Algorithm, 6 items (Provinces) were obtained for high Clusters, 2 Provinces for medium Clusters and 27 Provinces for low Clusters. The conclusion that can be obtained is that the grouping of plantation crop production in Indonesia can be solved by applying the K-Means algorithm.

References

M. A. Amri, D. Hartama, A. Wanto, Sumarno, and H. S. Tambunan, “Penerapan Metode Fuzzy Mamdani dalam Penentuan Penerima BLT-DD di Mekar Sari Raya,” KOMIK (Konferensi Nasional Teknologi Informasi dan Komputer), vol. 4, no. 1, pp. 269–277, 2020.

A. Wulandari, R. P. Saragih, Maslina Manurung, A. Wanto, and rfan S. Damanik, “Sistem Pendukung Keputusan pada Pemilihan Masker Wajah Facial mask Berdasarkan Konsumen dengan Metode Analytical Hierarchy Process,” in Seminar Nasional Ilmu Sosial dan Teknologi (SANISTEK), 2021, pp. 197–201.

F. Fania, M. Azzahra, D. Hartama, A. Wanto, and A. Rahim, “Rekomendasi Pemilihan Calon Peserta MTQ Terbaik Tahun 2019 dengan Teknik Additive Ratio Assessment (ARAS),” in Seminar Nasional Sains dan Teknologi Informasi (SENSASI), 2021, pp. 608–612.

D. N. Batubara, A. Padillah, Chairunnisa, A. Wanto, and Saifullah, “Penerapan Metode VIKOR Untuk Menentukan Susu Lansia Terbaik,” in Seminar Nasional Sains dan Teknologi Informasi (SENSASI), 2021, pp. 586–591.

S. R. Ningsih, D. Hartama, A. Wanto, I. Parlina, and Solikhun, “Penerapan Sistem Pendukung Keputusan Pada Pemilihan Objek Wisata di Simalungun,” in Seminar Nasional Teknologi Komputer & Sains (SAINTEKS), 2019, pp. 731–735.

M. Widyasuti, A. Wanto, D. Hartama, and E. Purwanto, “Rekomendasi Penjualan Aksesoris Handphone Menggunakan Metode Analitycal Hierarchy Process (AHP),” Konferensi Nasional Teknologi Informasi dan Komputer, vol. 1, no. 1, pp. 27–32, 2017.

A. Wanto and H. Damanik, “Analisis Penerapan Sistem Pendukung Keputusan Terhadap Seleksi Penerima Beasiswa BBM (Bantuan Belajar Mahasiswa) Pada Perguruan Tinggi Menggunakan Metode Simple Additive Weighting (SAW) (Studi Kasus : AMIK Tunas Bangsa Pematangsiantar),” in Seminar Nasional Rekayasa (SNTR) II, 2015, no. 2, pp. 323–333.

A. Wanto and E. Kurniawan, “Seleksi Penerimaan Asisten Laboratorium Menggunakan Algoritma AHP Pada AMIK-STIKOM Tunas Bangsa Pematangsiantar,” Jurnal Informatika dan Komputer (JIKO), vol. 3, no. 1, pp. 11–18, 2018.

S. P. Siregar, D. Hartama, and A. Wanto, “Estimasi Nilai Tukar Petani Subsektor Tanaman Pangan Menggunakan JST pada Provinsi Sumatera Utara,” Prosiding Seminar Nasional Riset Information Science (SENARIS), vol. 1, no. September, pp. 369–377, Sep. 2019.

C. Astria, H. Okprana, A. Wanto, D. Hartama, and H. S. Tambunan, “Implementasi Inferensi Fuzzy Tsukamoto pada Prediksi Penjualan Telur Ayam Eropa pada Bisnis Raffa Telur,” KOMIK (Konferensi Nasional Teknologi Informasi dan Komputer), vol. 4, no. 1, pp. 58–61, 2020.

S. Andini, R. Sitanggang, A. Wanto, H. Okprana, G. S. Achmad Daengs, and S. Aryza, “Utilization of Rough Sets Method with Optimization Genetic Algorithms in Heart Failure Cases,” Journal of Physics: Conference Series, vol. 1933, no. 1, pp. 1–9, 2021.

W. Saputra, J. T. Hardinata, and A. Wanto, “Penerapan Metode Resilient dalam Menentukan Model Arsitektur Terbaik untuk Prediksi Pengangguran Terbuka di Indonesia,” in Seminar Nasional Aplikasi Teknologi Informasi (SNATi), 2019, pp. 21–29.

R. D. Dana, A. R. Dikananda, D. Sudrajat, A. Wanto, and F. Fasya, “Measurement of health service performance through machine learning using Clustering techniques,” Journal of Physics: Conference Series, vol. 1360, no. 1, pp. 1–6, 2019.

Y. Andriani, A. Wanto, and H. Handrizal, “Jaringan Saraf Tiruan dalam Memprediksi Produksi Kelapa Sawit di PT. KRE Menggunakan Algoritma Levenberg Marquardt,” Prosiding Seminar Nasional Riset Information Science (SENARIS), vol. 1, no. September, pp. 249–259, 2019.

I. C. Saragih, D. Hartama, and A. Wanto, “Prediksi Perkembangan Jumlah Pelanggan Listrik Menurut Pelanggan Area Menggunakan Algoritma Backpropagation,” Building of Informatics, Technology and Science (BITS), vol. 2, no. 1, pp. 48–54, 2020.

M. Syafiq, D. Hartama, I. O. Kirana, I. Gunawan, and A. Wanto, “Prediksi Jumlah Penjualan Produk di PT Ramayana Pematangsiantar Menggunakan Metode JST Backpropagation,” JURIKOM (Jurnal Riset Komputer), vol. 7, no. 1, p. 175, 2020.

M. Situmorang, A. Wanto, and Z. M. Nasution, “Architectural Model of Backpropagation ANN for Prediction of Population-Based on Sub-Districts in Pematangsiantar City,” International Journal of Information System & Technology, vol. 3, no. 1, pp. 98–106, 2019.

N. Z. Purba, A. Wanto, and I. O. Kirana, “Implementation of ANN for Prediction of Unemployment Rate Based on Urban Village in 3 Sub-Districts of Pematangsiantar,” International Journal of Information System & Technology (IJISTECH), vol. 3, no. 1, pp. 107–116, 2019.

I. I. P. Damanik, S. Solikhun, I. S. Saragih, I. Parlina, D. Suhendro, and A. Wanto, “Algoritma K-Medoids untuk Mengelompokkan Desa yang Memiliki Fasilitas Sekolah di Indonesia,” in Prosiding Seminar Nasional Riset Information Science (SENARIS), 2019, vol. 1, no. September, pp. 520–527.

F. S. Napitupulu, I. S. Damanik, I. S. Saragih, and A. Wanto, “Algoritma K-Means untuk Pengelompokkan Dokumen Akta Kelahiran pada Tiap Kecamatan di Kabupaten Simalungun,” Building of Informatics, Technology and Science (BITS) Volume, vol. 2, no. 1, pp. 55–63, 2020.

S. F. Damanik, A. Wanto, and I. Gunawan, “Penerapan Algoritma Decision Tree C4.5 untuk Klasifikasi Tingkat Kesejahteraan Keluarga pada Desa Tiga Dolok,” Jurnal Krisnadana Volume, vol. 1, no. 2, pp. 21–32, 2022.

I. Parlina et al., “Naive Bayes Algorithm Analysis to Determine the Percentage Level of visitors the Most Dominant Zoo Visit by Age Category,” Journal of Physics: Conference Series, vol. 1255, no. 1, pp. 1–5, 2019.

N. A. Febriyati, A. D. GS, and A. Wanto, “GRDP Growth Rate Clustering in Surabaya City uses the K- Means Algorithm,” International Journal of Information System & Technology, vol. 3, no. 2, pp. 276–283, 2020.

M. A. Hanafiah and A. Wanto, “Implementation of Data Mining Algorithms for Grouping Poverty Lines by District/City in North Sumatra,” International Journal of Information System & Technology, vol. 3, no. 2, pp. 315–322, 2020.

A. Pradipta, D. Hartama, A. Wanto, S. Saifullah, and J. Jalaluddin, “The Application of Data Mining in Determining Timely Graduation Using the C45 Algorithm,” IJISTECH (International Journal of Information System & Technology), vol. 3, no. 1, pp. 31–36, 2019.

N. Arminarahmah, A. D. GS, G. W. Bhawika, M. P. Dewi, and A. Wanto, “Mapping the Spread of Covid-19 in Asia Using Data Mining X-Means Algorithms,” IOP Conference Series: Materials Science and Engineering, vol. 1071, no. 1, pp. 1–7, 2021.

T. H. Sinaga, A. Wanto, I. Gunawan, S. Sumarno, and Z. M. Nasution, “Implementation of Data Mining Using C4.5 Algorithm on Customer Satisfaction in Tirta Lihou PDAM,” Journal of Computer Networks, Architecture, and High-Performance Computing, vol. 3, no. 1, pp. 9–20, 2021.

D. Haryadi, “Penerapan Algoritma K-Means Clustering Pada Produksi Perkebunan Kelapa Sawit Menurut Provinsi,” Journal of ICT (Informatics and Communications Technology), vol. 3, no. 1, pp. 1–15, 2021.

A. Lili and S. Widodo, “Pengelompokan Hasil Panen Kelapa Sawit Dalam Produksi Per Blok,” vol. 01, no. 01, pp. 45–54, 2022.

Z. S. Younus et al., “Content-based image retrieval using PSO and k-means Clustering algorithm,” Arabian Journal of Geosciences, vol. 8, no. 8, pp. 6211–6224, 2015.

E. Prasetyo, Data Mining: Konsep dan Aplikasi menggunakan Matlab. Yogyakarta: Andi Offset, 2012.

D. T. Larose, Discovering Knowledge in Data: An Introduction to Data Mining: Second Edition. New Jersey: John Wiley & Sons, 2005.

R. Primartha, Belajar Machine Learning Teori dan Praktik. Bandung: Informatika Bandung, 2018.

T. Khotimah, “Pengelompokan Surat dalam Al Qur’an menggunakan Algortima K-Means,” Jurnal Simetris, vol. 5, no. 1, pp. 83–88, 2014.

I. Parlina, A. P. Windarto, A. Wanto, and M. R. Lubis, “Memanfaatkan Algoritma K-Means dalam Menentukan Pegawai yang Layak Mengikuti Asessment Center untuk Clustering Program SDP,” CESS (Journal of Computer Engineering System and Science), vol. 3, no. 1, pp. 87–93, 2018.

Downloads

Published

2022-12-30

How to Cite

Simangunsong, A. A., Gunawan, I., & Nasution, Z. M. (2022). Clustering Production of Plantation Crops by Province Using the K-Means Method. JOMLAI: Journal of Machine Learning and Artificial Intelligence, 1(4), 273–284. https://doi.org/10.55123/jomlai.v1i4.1661

Issue

Vol. 1 No. 4 (2022): December

Section

Articles

License

Copyright (c) 2022 Azhari Abdillah Simangunsong, Indra Gunawan, Zulaini Masruro Nasution

Creative Commons License

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

Copyright (c) 2022 The authors. Published by Yayasan Literasi Indonesia
Creative Commons License This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License

The author(s) whose article is published in the JOMLAI journal attain the copyright for their article and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution-ShareAlike 4.0 International License. By submitting the manuscript to JOMLAI, the author(s) agree with this policy. No special document approval is required.

The author(s) guarantee that:their article is original, written by the mentioned author(s),

  • has never been published before,
  • does not contain statements that violate the law, and
  • does not violate the rights of others, is subject to copyright held exclusively by the author(s), and is free from the rights of third parties, and that the necessary written permission to quote from other sources has been obtained by the author(s).

The author(s) retain all rights to the published work, such as (but not limited to) the following rights:

  • Copyright and other proprietary rights related to the article, such as patents,
  • The right to use the substance of the article in its own future works, including lectures and books,
  • The right to reproduce the article for its own purposes,
  • The right to archive all versions of the article in any repository, and
  • The right to enter into separate additional contractual arrangements for the non-exclusive distribution of published versions of the article (for example, posting them to institutional repositories or publishing them in a book), acknowledging its initial publication in this journal (JOMLAI: Journal of Machine Learning and Artificial Intelligence).

Suppose the article was prepared jointly by more than one author. Each author submitting the manuscript warrants that all co-authors have given their permission to agree to copyright and license notices (agreements) on their behalf and notify co-authors of the terms of this policy. JOMLAI will not be held responsible for anything that may arise because of the writer's internal dispute. JOMLAI will only communicate with correspondence authors.

Authors should also understand that their articles (and any additional files, including data sets, and analysis/computation data) will become publicly available once published. The license of published articles (and additional data) will be governed by a Creative Commons Attribution-ShareAlike 4.0 International License. JOMLAI allows users to copy, distribute, display and perform work under license. Users need to attribute the author(s) and JOMLAI to distribute works in journals and other publication media. Unless otherwise stated, the author(s) is a public entity as soon as the article is published