STUDI KASUS PERHITUNGAN TEGANGAN PADA FLAT BELT DALAM APLIKASI MESIN IHR: STUDI KASUS PERHITUNGAN TEGANGAN PADA FLAT BELT DALAM APLIKASI MESIN IHR

Rouf Muhammad; Muhamad Safi'i; Ahmad Ramdhani; Muhammad Idrokul Fahmi

doi:10.55123/storage.v3i2.3504

Authors

Rouf Muhammad Teknik Mesin, FASTIKOM, UNSIQ
Muhamad Safi'i Teknik Mesin, FASTIKOM, UNSIQ
Ahmad Ramdhani Teknik Mesin, FASTIKOM, UNSIQ
Muhammad Idrokul Fahmi Teknik Mesin, FASTIKOM, UNSIQ

DOI:

https://doi.org/10.55123/storage.v3i2.3504

Keywords:

CVT, Flat Belt, Stress

Abstract

The Continuously Variable Transmission (CVT) automatic transmission system is a power transmission component widely used in various industrial sectors such as manufacturing, paper, automotive, and electric power. The decision to use this transmission is made due to its ease of maintenance, affordability, and its ability to operate within various power and speed ranges. Key components of the CVT automatic transmission system include flat belts, pulleys, rollers, CVT springs, CVT clutch linings, and clutch clutches. Calculation analysis will be conducted to determine the maximum stress of the flat belt, identify the material of the flat belt, and calculate the lifespan of the flat belt using the IHR machine. The results of the calculation show that the tight side stress is 383.3639 N, the loose side stress is 64.867 N, and the belt material stress is 3.1 N/mm². These optimal stress and material stress values are deemed suitable for use.

Downloads

Download data is not yet available.

References

Ardiyan, H. S. (2012). Pola Vibrasi Dari Transmisi V-Belt Dibawah Pengaruh Parallel Misalignment Ardhian. Artady teknik Pomits Vol. 2, No. 2, (2012) ISSN: 2301-9271, 2(2), 239–242. Ardhian Heru Saputra dan Bambang Daryanto Wonoyudo%0AJurusan Teknik Mesin, Fakultas Teknologi Industri, Institut Teknologi Sepuluh Nopember (ITS) Jl. Arief Rahman Hakim, Surabaya 60111 Indonesia

Cholis, N., Ariyono, S., & Priyandoko, G. (2015). Design of single acting pulley actuator (SAPA) continuously variable transmission (CVT). Energy Procedia, 68, 389–397. https://doi.org/10.1016/j.egypro.2015.03.270

Ilmy, I. (2018). Konstanta Pegas Dan Massa Roller Continuously Variable Transmission ( Cvt ) Terhadap Peforma Kendaraan Honda Vario. Pengaruh.

Khurmi, R. S., & Gupta, J. K. (2000). Handbook of Machinery Dynamics. Handbook of Machinery Dynamics, 1, 11–28.

Mahmudi, H. (2021). Analisa Perhitungan Pulley dan V-Belt Pada Sistem Transmisi Mesin Pencacah.Jurnal Mesin Nusantara, 4(1), 40–46. https://doi.org/10.29407/jmn.v4i1.16201

Nofendri, Y., & Christian, E. (2020). Pengaruh Berat Roller Terhadap Performa Mesin Yamaha Mio Soul 110 Cc Yang Menggunakan Jenis Transmisi Otomatis (CVT). Jurnal Kajian Teknik Mesin, 5(1), 58–65. https://doi.org/10.52447/jktm.v5i1.3991

Putra, R. A., & Kambali. (2023). J-Meeg the Effect of V-Belt Size and Groove Angle. 2(1), 132–138.

Salam, R., Dinas, T., Kerja, D., Transmigrasi, B., Latihan, K., Provinsi, K., & Selatan, P. M. (2016). Pengaruh Penggunaan Variasi Berat Roller Pada Sistem Cvt (Continuously Variable Transmission) Terhadap Performa Sepeda Motor Honda BeaT 110cc, 2009. 1–6.

STUDI KASUS PERHITUNGAN TEGANGAN PADA FLAT BELT DALAM APLIKASI MESIN IHR