Pengawasan Kualitas Beton Pada Proyek Dinding Penahan Tanah Kejaksaan Tinggi Sumatera Selatan
DOI:
https://doi.org/10.55123/storage.v4i3.5742Keywords:
mutu beton, pengawasan kualitas, slump test, uji kuat tekan, dinding penahan tanahAbstract
This study aims to describe the process of monitoring the quality of concrete in the retaining wall construction project at the South Sumatra High Prosecutor's Office. The concrete used is a type of ready mix quality K-175, with supervision carried out through the stages of slump test, sample collection and curing, and concrete compressive strength test. This research uses a qualitative descriptive method with a case study approach. The results showed that the concrete slump value was within the specification range (10-12 cm), while the concrete compressive strength test results at the age of 7 days reached an average of 181.469 kgf/cm² and at the age of 14 days amounted to 188.397 kgf/cm². These values indicate that the concrete has met the technical strength requirements for non-structural structures. Some field constraints such as high rainfall and delays in concrete delivery can be overcome by rescheduling, the use of work area protection, and good logistical coordination. Overall, the concrete quality in this project was in accordance with the set standards.
Downloads
References
-2847, S. (2013). Persyaratan Beton Struktural untuk Bangunan Gedung SNI 2847-2013. Badan Standarisasi Nasional, 265.
Amdiya Huqbanl; Paikun; Cece Suhendi; Universitas Nusa Putra. (2020). Analysis of Material Delays in The Timeliness of Development. Jurnal Teknik Sipil Dan Lingkungan Universitas Nusa Putra (J-TESLINK, 1(2), 35–43. https://teslink.nusaputra.ac.id
Darsini, & Triwardana, E. (2021). Pengendalian kualitas proses produksi beton bantalan jalan rel dipt. Abc. Metrik Serial Teknologi Dan Sains, 2(2), 40–46.
Differences, T., Concrete, M., Quality, B., & Fc, Q. (2024). Analisis Perbedaan Beton Ready Mix Antara Mutu K dengan Mutu FC. 2(3), 1–14.
Hamdi, F., Lapian, F. E., Tumpu, M., Mansyur, Irianto, Mabui, D. D. S., Raidyarto, A., Sila, A. A., Pérez, C., Aranceta, J., Serra, L., Carbajal, Á., Rangan, P. R., & Hamkah. (2022). Teknologi Beton. In Tohar Media (Vol. 1, Issue 1). http://www.nutricion.org/publicaciones/pdf/prejuicios_y_verdades_sobre_grasas.pdf%0Ahttps://www.colesterolfamiliar.org/formacion/guia.pdf%0Ahttps://www.colesterolfamiliar.org/wp-content/uploads/2015/05/guia.pdf
Hoy, M., Srijaroen, C., Horpibulsuk, S., Phunpeng, V., Rachan, R., & Arulrajah, A. (2023). Innovative Solution: Soil Cement Column Walls As a Temporary Retaining Structure For Excavation In Soft Bangkok Clay. Smart Construction and Sustainable Cities, 1(1), 1–19. https://doi.org/10.1007/s44268-023-00017-z
I Gusti Ngurah, E. P., Astariani, N. K., Sudika, I. G. M., & Silvi, N. P. (2024). Evaluasi Mutu Beton Proyek Pembangunan Gedung di Desa Pesagi Kabupaten Tabanan-Bali. Jurnal Ilmiah Telsinas Elektro, Sipil Dan Teknik Informasi, 7(1), 74–83. https://doi.org/10.38043/telsinas.v7i1.5175
Mukhtar, M. (2022). Laporan Kuliah Kerja Pt. Sinar Terang Madani Kuliah Kerja Praktek. https://lib.atim.ac.id/uploaded_files/temporary/DigitalCollection/NGE1YjE2MzI1Mzc0ZDg1YmI3MTEwMzliMjE1MzM5YWYzMDhhNjVlYg==.pdf
Mulyati, E., & Anggriani, M. (2022). Pengaruh Pemanfaatan Abu Ampas Tebu dan Kawat Bendrat Terhadap Kuat Tekan dan Kuat Lentur Beton Ringan. Jurnal Teknik Sipil, 29(2), 199–206. https://doi.org/10.5614/jts.2022.29.2.11
Nurokhman, N., Suharyanto, I., & Rochmawati, U. (2021). Evaluasi Mutu Beton Dari Berbagai Ready Mix Pada Gedung Parkir Yogyakarta International Airport. CivETech, 3(2), 55–65. https://doi.org/10.47200/civetech.v3i2.1058
Paryati, N., Nuryati, S., Yulius, E., & Agussalim, A. M. (2024). Analisis Hasil Kuat Tekan Beton Normal Terhadap Mix Design Kuat Tekan Beton Rencana. Jurnal Kridatama Sains Dan Teknologi, 6(02), 415–429. https://doi.org/10.53863/kst.v6i02.1244
Persada, P. (2020). Evaluasi Biaya dan Percepatan Progres Pekerjaan Pada Pelaksanaan Proyek Konstruksi. 175.45.187.195, 31124. ftp://175.45.187.195/Titipan-Files/BAHAN WISUDA PERIODE V 18 MEI 2013/FULLTEKS/PD/lovita meika savitri (0710710019).pdf
Pratiwi, S. A., & Pudyastuti, P. S. (2023). Pengawasan Dan Pengendalian Mutu Beton Pada Pelaksanaan Pembangunan Bendungan Jlantah. Prosiding Seminar Nasional Teknik Sipil, 50–57.
Rasendriya, B., Pradipa, C., & Praja, B. A. (2024). Material Penyusun dan Formula Campuran Beton untuk Produk PCI Girder. 2(1).
Safari, A., Solikin, M., Sunarjono, S., Handayani, F. S., Harnaeni, S. R., Magister, P., Sipil, T., Surakarta, U. M., Sipil, P. T., Teknik, F., Maret, U. S., Pendidikan, U., & Sorong, M. (2021). Identifikasi indikator kinerja untuk mengukur keberhasilan pada proyek konstruksi jalan beton berdasarkan perspektif penyedia jasa konstruksi.
Setiadi, M. S., Usman, K., Sebayang, S., & Kustiani, I. (2024). Analisis Pengendalian Mutu Beton pada Proyek Rumah Susun PIK Pulo Gadung dengan Metode Statistical Quality Control. Journal of Sustainable Construction, 3(2), 1–15. https://doi.org/10.26593/josc.v3i2.7218
SNI-03-1972. (2009). SNI Uji Slump Beton.
Sofiyanto, O. P., Alumni, Y., Diponegoro, U., Semarang, U., Teknik, F., & Teknik, J. (2020). Analisa Uji Kuat Tekan Beton Dengan bahan Campuran Tck Coat.
Suwandi, A. (2012). Pengendalian Kualitas Beton Melalui Pengujian Kuat Tekan Dengan Metode Design Of Experiment (DOE). Jurnal InovisiTM, 8(1), 30–41.
Syahdana, M. Z., & Safitri, D. (2021). Perkiraan Kekuatan ( Mutu ) Beton Tanpa Merusak Beton ( Pengujian Kuat Tekan Beton dengan Hammer Test ). Jurnal Ilmu Teknik, 1(3), 1–9. http://ilmuteknik.org/index.php/ilmuteknik/article/view/49
Yunus, A. I., Ulfiyati, Y., Mulyati, E., Priana, S. E., Roring, H. S. D., Junaed, I. W. R., Yuliana, A., Zayu, W. P., Ghozali, Z., Stighfarrinata, R., & others. (2024). Manajemen Proyek. CV. Gita Lentera.
Zhao, S. (2020). Discussion on Quality Control and Supervision Countermeasures of Precast Concrete Structure. Civeb, 6–10. https://doi.org/10.25236/civeb.2020.002
Downloads
Published
Issue
Section
License
Copyright (c) 2025 Sonia, Ely Mulyati
This work is licensed under a Creative Commons Attribution 4.0 International License.
