Analisis Intensitas Kebisingan pada Area Fabrikasi PT XYZ Bintan
DOI:
https://doi.org/10.55123/insologi.v2i2.1929Keywords:
Noise, Industry, Sound Level MeterAbstract
Noise in the industrial sector of a company caused by the use of machines and working tools to support the production process. Noise levels that exceed the threshold limit can lead to hearing loss and the risk of damage to the ears, both temporary and permanent after exposure for a certain period of time without the use of adequate protective equipment. This potential risk encourages governments in various countries to make regulations that limit the level of noise in the industry. This research was carried out by observing and measuring directly on the research object, namely by using a Sound Level Meter and repeating the data 4 times at each point of data collection on noise intensity. An analysis of the noise intensity in the PT XYZ Bintan fabrication area was carried out in order to create a working environment that is safe, comfortable and conducive and can overcome the hazards caused by the noise generated. The noise level in the PT XYZ Bintan fabrication area does not fully meet the standard noise standards in the work environment according to the Minister of Manpower Regulation Number 5 of 2018, which is 85 dBA. The results of capturing the distribution of Leq noise that have been made show that the noise level at Workshop 5 and Workshop 8 has passed the required quality standards, namely 95.1 dBA and 93.5 dBA respectively. While Workshop 9 and Workshop 10 the noise level was close to the quality standard, namely 84.3 dBA and 84.8 dBA. Mitigation efforts that have been carried out by PT XYZ Bintan are hearing protection including the use of hearing protection devices, audiometric testing as well as motivation and reduction of noise problems.
Downloads
References
Amnur, M. A. (2020). Pengukuran dan Analisis Intensitas Kebisingan di Area Produksi PT. Sinar Sanata Electronic Industry Medan (Doctoral dissertation, Universitas Medan Area).
Anizar. (2010). Teknik Keselamatan dan Kesehatan Kerja di Industri. Yogyakarta: Graha Ilmu.
Budiono, A.M.S. (2003). Bunga Rampai Hiperkes dan Keselamatan Kerja, Semarang: Badan Penerbit Universitas Diponegoro.
Djalante, S. (2010). Analisis tingkat kebisingan di jalan raya yang menggunakan alat pemberi isyarat lalu lintas (apil) (Studi kasus: Simpang Ade Swalayan). SMARTek, 8(4).
Harwanto, I. (2004). Perbedaan Tingkat Kelelahan Tenaga Kerja Akibat Intensitas Kebisingan yang Berbeda di PT Kereta Api (Persero) Daerah Operasi IV Semarang (Doctoral Dissertation, Diponegoro University).
Lia, L., & Utami, D. (2014). Pengaruh Intensitas Kebisingan Terhadap Tingkat Kelelahan Pada Pekerja PT. Actem Bagian Proses Produksi RSF (Pemintalan Benang) Dan Proses Produksi Cone-Up. Indonesian of Health Information Management Journal (INOHIM), 2(1), 50-58.
Maison, M., Anggraini, F. J., & Falih, M. (2020). Analisis Tingkat Kebisingan di Area Mesin Produksi Bangsal Kayu Sebrang Kota Jambi dan Hubungan dengan Kelelahan pada Karyawan. Jurnal Engineering, 2(1), 40-49.
Marisdayana, R., Suhartono, S., & Nurjazuli, N. (2016). Hubungan Intensitas Paparan Bising Dan Masa Kerja Dengan Gangguan Pendengaran Pada Karyawan PT. X.
Rambe, A. (2003). Gangguan pendengaran akibat bising. Fakultas Kedokteran: Universitas Sumatera Utara.
Rimantho, D., & Cahyadi, B. (2015). Analisis kebisingan terhadap karyawan di lingkungan kerja pada beberapa jenis perusahaan. Jurnal Teknologi, 7(1), 21-27.
Satwiko, P. (2004). Fisika Bangunan 1 Edisi 1. Yogyakarta: ANDI.
Setiawan, A. Y. (2000). Studi Perbedaan Kelelahan Kerja pada Bagian Machine Moulding dan Floor Moulding Shif I Unit Produksi Departemen Foundry PT Texmaco Perkasa Engineering Kaliwungu Kendal (Doctoral dissertation, Diponegoro University).
Suroto, W. (2010). Dampak Kebisingan Lalu Lintas Terhadap Permukiman Kota (Kasus Kota Surakarta). Journal of Rural and Development, 1(1).
Tarwaka, Solichul H.A., Bakri, Sudiajeng, L., 2004. Ergonomi untuk Keselamatan, Kesehatan Kerja dan Produktivitas. Surakarta : UNIBRA PRESS.
Wulandari, E. T. (2004). Hubungan antara Kebisingan dan Tekanan Panas dengan Kelelahan pada Operator Di Bagian Injeksi PT Arisa Mandiri Pratama (Doctoral dissertation, Diponegoro University.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2023 Effine Lourrinx, Muhammad Navis Mirza, Rizki Eka Praditya
This work is licensed under a Creative Commons Attribution 4.0 International License.
Hak cipta pada setiap artikel adalah milik penulis.
Penulis mengakui bahwa INSOLOGI (Jurnal Sains dan Teknologi) sebagai publisher yang mempublikasikan pertama kali dengan lisensi Creative Commons Attribution 4.0 International License.
Penulis dapat memasukan tulisan secara terpisah, mengatur distribusi non-ekskulif dari naskah yang telah terbit di jurnal ini kedalam versi yang lain, seperti: dikirim ke respository institusi penulis, publikasi kedalam buku, dan lain-lain. Dengan mengakui bahwa naskah telah terbit pertama kali pada INSOLOGI (Jurnal Sains dan Teknologi).
