Lean Six Sigma untuk Minimasi Pemborosan pada Proses Penyamakan Kulit Domba

Authors

  • Rahayu Khasanah IST AKPRIND Yogyakarta
  • Grace S Kojoba IST AKPRIND Yogyakarta
  • Argaditia Mawadati IST AKPRIND Yogyakarta

DOI:

https://doi.org/10.55123/insologi.v1i3.382

Keywords:

Waste, DMAIC, VSM, FMEA

Abstract

PT. Adi Satria Abadi is a company engaged in the leather industry. The research was carried out at the first location of the factory located in Bantul district, Yogyakarta. In the leather sheet production process, there is still some waste: Waste defect, in August 2021 there were 6,559.55 Sf of rework products from 161.9965 Sf of leather with a percentage of 4% rework products. As well as the waste of waiting time during manual drying, repetition of activities when transferring leather from hanging to milling, and the distance between dyeing stations to setters and hanging to milling.Based on the results of the analysis, the causes of waste include: Waiting time (cloudy weather), transportation waste (factory layout is not good), motion waste (the closest access to hanging is only through the setter section), rework toggle (skin pull is not strong because the operator is tired) and rework buff (operator misread the information and skin maturation in the tanning process is not good).The recommendations for improvement are adding a blower unit in the manual drying (hanging) section, rearranging the factory layout to minimize transportation and motion waste, adding rest hours and adding 2 fan units in the toggle room. Improving accuracy, and coordination between operators and foremen in the shaving section as well as improving the implementation of SOP in the tanning process.

Downloads

Download data is not yet available.

References

Ben Romdhane, T., Badreddine, A., & Sansa, M. (2017). A new model to implement Six Sigma in small- and medium-sized enterprises. International Journal of Production Research, 55(15), 4319–4340. https://doi.org/10.1080/00207543.2016.1249430

C.R, A., & Thakkar, J. J. (2019). Application of Six Sigma DMAIC methodology to reduce the defects in a telecommunication cabinet door manufacturing process: A case study. International Journal of Quality and Reliability Management, 36(9), 1540–1555. https://doi.org/10.1108/IJQRM-12-2018-0344

Costa, L. B. M., Godinho Filho, M., Fredendall, L. D., & Gómez Paredes, F. J. (2018). Lean, six sigma and lean six sigma in the food industry: A systematic literature review. Trends in Food Science and Technology, 82(August), 122–133. https://doi.org/10.1016/j.tifs.2018.10.002

Erdil, N. O., Aktas, C. B., & Arani, O. M. (2018). Embedding sustainability in lean six sigma efforts. Journal of Cleaner Production, 198, 520–529. https://doi.org/10.1016/j.jclepro.2018.07.048

Henny, H., Andriana, I., Latifah, A. N., & Haryanto, H. (2019). The Application Lean Six Sigma Method Approach to Minimize Waste. IOP Conference Series: Materials Science and Engineering, 662(2), 1–7. https://doi.org/10.1088/1757-899X/662/2/022089

Isnain, S. K., & Karningsih, P. D. (2020). Perancangan Perbaikan Proses Produksi Komponen Bodi Mobil Daihatsu dengan Lean Manufacturing di PT. “XYZ.” Jurnal Studi Manajemen Dan Bisnis, 5(2), 122–129. https://doi.org/10.21107/jsmb.v5i2.6667

Lukita, D. S. A., & Al-Faritsy, A. Z. (2020). Usulan Perbaikan Proses Produksi Briket Dengan Pendekatan Lean Six Sigma Studi Kasus Pada Cv Danagung. JISI: Jurnal Integrasi Sistem Industri, 7(1), 13–19. Retrieved from https://jurnal.umj.ac.id/index.php/jisi/article/view/6381

Panayiotou, N. A., Stergiou, K. E., & Panagiotou, N. (2022). Using Lean Six Sigma in small and medium-sized enterprises for low-cost/high-effect improvement initiatives: a case study. International Journal of Quality and Reliability Management, 39(5), 1104–1132. https://doi.org/10.1108/IJQRM-01-2021-0011

Raja Sreedharan, V., & Raju, R. (2016). A systematic literature review of Lean Six Sigma in different industries. International Journal of Lean Six Sigma, 7(4), 430–466. https://doi.org/10.1108/IJLSS-12-2015-0050

Soundararajan, K., & Janardhan Reddy, K. (2019). Cost-reduction and quality improvement using DMAIC in the SMEs. International Journal of Productivity and Performance Management, 68(8), 1528–1540. https://doi.org/10.1108/IJPPM-10-2018-0360

Sreedharan, R. V., Sunder, V. M., & Raju, R. (2018). Critical success factors of TQM, Six Sigma, Lean and Lean Six Sigma: A literature review and key findings. Benchmarking, 25(9), 3479–3504. https://doi.org/10.1108/BIJ-08-2017-0223

Sucipto, Susilowati, E., & Effendi, U. (2020). Reducing waste on wheat flour packaging: An analysis of Lean Six Sigma. IOP Conference Series: Earth and Environmental Science, 475(1), 1–9. https://doi.org/10.1088/1755-1315/475/1/012002

Sutrisno, A., Gunawan, I., Vanany, I., Asjad, M., & Caesarendra, W. (2020). An improved modified FMEA model for prioritization of lean waste risk. International Journal of Lean Six Sigma, 11(2), 233–253. https://doi.org/10.1108/IJLSS-11-2017-0125

Syahputri, K., Sari, R. M., Anizar, Tarigan, I. R., & Siregar, I. (2018). Application of lean six sigma to waste minimization in cigarette paper industry. IOP Conference Series: Materials Science and Engineering, 309(1), 1–7. https://doi.org/10.1088/1757-899X/309/1/012027

Uluskan, M., & Oda, E. P. (2020). A thorough Six Sigma DMAIC application for household appliance manufacturing systems: Oven door-panel alignment case. TQM Journal, 32(6), 1683–1714. https://doi.org/10.1108/TQM-06-2019-0171

I. S. Damanik, A. P. Windarto, A. Wanto, Poningsih, S. R. Andani, and W. Saputra, “Decision Tree Optimization in C4.5 Algorithm Using Genetic Algorithm,” in Journal of Physics: Conference Series, 2019, vol. 1255, no. 1, pp. 1–6.

M. G. Sadewo, A. P. Windarto, and A. Wanto, “Penerapan Algoritma Clustering dalam Mengelompokkan Banyaknya Desa/Kelurahan Menurut Upaya Antisipasi/ Mitigasi Bencana Alam Menurut Provinsi dengan K-Means,” KOMIK (Konferensi Nasional Teknologi Informasi dan Komputer), vol. 2, no. 1, pp. 311–319, 2018.

Downloads

Published

2022-06-28

How to Cite

Rahayu Khasanah, Kojoba, G. S., & Mawadati, A. (2022). Lean Six Sigma untuk Minimasi Pemborosan pada Proses Penyamakan Kulit Domba . INSOLOGI: Jurnal Sains Dan Teknologi, 1(3), 204–217. https://doi.org/10.55123/insologi.v1i3.382

Issue

Vol. 1 No. 3 (2022): Juni 2022

Section

Articles

License

Copyright (c) 2022 Rahayu Khasanah, Grace S Kojoba, Argaditia Mawadati

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

Hak cipta pada setiap artikel adalah milik penulis.
Penulis mengakui bahwa INSOLOGI (Jurnal Sains dan Teknologi) sebagai publisher yang mempublikasikan pertama kali dengan lisensi Creative Commons Attribution 4.0 International License.
Penulis dapat memasukan tulisan secara terpisah, mengatur distribusi non-ekskulif dari naskah yang telah terbit di jurnal ini kedalam versi yang lain, seperti: dikirim ke respository institusi penulis, publikasi kedalam buku, dan lain-lain. Dengan mengakui bahwa naskah telah terbit pertama kali pada INSOLOGI (Jurnal Sains dan Teknologi).