Analisis Kinerja Mesin Band Saw Soft Mill Menggunakan Total Productive Maintenance Pada PT. Alis Jaya Ciptatama
DOI:
https://doi.org/10.55123/insologi.v1i3.412Keywords:
TPM, OEE, Six Big Losses, FMEAAbstract
PT Alis Jaya Ciptatama is one of the furniture manufacturers. The band saw soft mill production machine used will experience damage and decrease in performance as the machine ages. The process of changing bearing sets requires 40 hours of downtime in one band saw soft mill machine per year. In addition, there is also a downtime in the process of replacing a broken saw which takes 124 hours per year. This study is to measure the effectiveness of the machine by using the overall equipment effectiveness (OEE) method. The object of this research is a band saw soft mill machine which is a wood cutting machine. The results of the effectiveness measurement show that the average availability value is 96.17%, performance efficiency is 82.15% and the rate of quality is 86.93% so that the OEE value is 68.8%. The OEE value does not meet the requirements of the ideal OEE standard, which is 85%. Then improvements were made by measuring the six big losses to determine the contribution of each loss.Based on the analysis using FMEA, the largest RPN value for the breakdown losses category is 336 for the hilarious bearing failure type and for the reduced speed losses category, which is 140 for the reduced engine speed failure type. Overcoming failures on funny bearings is to carry out preventive maintenance on a regular basis once a week.
Downloads
References
Agustiady, T. K., & Cudney, E. A. (2016). Strategies and implementation guide. https://b-ok.org/book/2572244/84bbac
Anthony, M. B. (2019). Analisis Penerapan Total Productive Maintenance (TPM) Menggunakan Overall Equipment Efectiveness (OEE) Dan Six Big Losses Pada Mesin Cold Leveller PT. KPS. JATI UNIK : Jurnal Ilmiah Teknik Dan Manajemen Industri, 2(1), 94. https://doi.org/10.30737/jatiunik.v2i2.333
Fitriadi, F., Muzakir, M., & Suhardi, S. (2020). Integrasi Overall Equipment Effectiveness (OEE) Dan Failure Mode And Effect Analysis (FMEA) Untuk Meningkatkan Efektifitas Mesin Screw Press Di Pt. Beurata Subur Persada Kabupaten Nagan Raya. Jurnal Optimalisasi, 4(2), 97-107.
Frima, F. R., Budiasih, E., & Ilhilman, J. (2019). Usulan Penerapan Total Productive Maintenance (tpm) Untuk Meningkatkan Efektivitas Mesin Single https://openlibrarypublications.telkomuniversity.ac.id/index.php/engineering/article/view/10980
Guedesa, M., Figueiredo, P. S., Pereira-Guizzoa, C. S., & Loiolab, E. (2021). The role of motivation in the results of total productive maintenance. Production, 31(2006), 1–14. https://doi.org/10.1590/0103-6513.20200057
Kulsum, K., Febianti, E., Trenggonowati, D. L., & Sutanto, Y. (2020). Review Produktivitas Mesin Menggunakan Total Productive Maintenance (Studi Kasus Perusahaan Manufaktur). Journal Industrial Servicess, 6(1), 40. https://doi.org/10.36055/jiss.v6i1.9472
Kurnia, N. F. (2019). Penerapan Total Productive Maintenance (TPM) Dengan Menggunakan Metode Overall Equipment Effectiveness (OEE) Dan Failure Mode And Effect Analysis (Fmea) Pada Mesin Jahit Toyota LS2-AD140 (Studi Kasus: CV Manggala Glove).
Meca Vital, J. C., & Camello Lima, C. R. (2020). Total Productive Maintenance and the Impact of Each Implemented Pillar in the Overall Equipment Effectiveness. International Journal of Engineering and Management Research, 10(02), 142–150. https://doi.org/10.31033/ijemr.10.2.17
Mtsweni, E. S., Hörne, Dkk (2020). Title. Engineering, Construction and Architectural Management, 25(1),1–9.
Nugroho, A. J. (2017). Evaluasi Gangguan Jaringan Telepon Menggunakan Metode FTA dan FMEA. https://doi.org/10.23917/jiti.v16i2.2420
Nurprihatin, F., Angely, M., & Tannady, H. (2019). Total productive maintenance policy to increase effectiveness and maintenance performance using overall equipment effectiveness. Journal of Applied Research on Industrial Engineering, 6(3), 184–199. https://doi.org/10.22105/jarie.2019.199037.1104
Pandey, A., Malviya, S., & Jain, S. (2019). Implemented the Overall Equipment Effectiveness ( OEE ) by the techniques of Total Productive Maintenance ( TPM ) in MSE ’ s - A case study. International Journal of Advance Research, Ideas and Innovations in Technology, 5(1), 503–511.
Prasmoro, A. V., & Ruslan, M. (2020). Analisis Penerapan Total Productive Maintenance (TPM) dengan Metode Overall Equipment Effectiveness (OEE) pada Mesin Kneader (Studi Kasus PT. XYZ). Journal of Industrial and Engineering System, 1(1), 53–64. https://doi.org/10.31599/jies.v1i1.167
Pratama, D., & Yuamita, F. (2021). Analisis Efektivitas Mesin Jahit Dengan Overall Equipment Effectiveness (OEE) Dan Failure Mode And Effect Analys (FMEA) (Study kasus : CV. Cahaya Setia Mulia). JIE.UPY Journal of Industrial Engineering Universitas PGRI Yogyakarta, 1(1), 23–30.
Tian Xiang, Z., & Jeng Feng, C. (2020). Journal of Industrial Engineering and Management Implementing Total Productive Maintenance in a Manufacturing Small or Medium-Sized Enterprise. Journal of Industrial Engineering and Management, 14(2), 152–175. https://doi.org/10.3926/jiem.3286
H. Siahaan, H. Mawengkang, S. Efendi, A. Wanto, and A. Perdana Windarto, “Application of Classification Method C4.5 on Selection of Exemplary Teachers,” Journal of Physics: Conference Series, vol. 1235, no. 1, pp. 1–7, Jun. 2019.
C. Astria, A. P. Windarto, A. Wanto, and E. Irawan, “Metode K-Means pada Pengelompokan Wilayah Pendistribusian Listrik,” Seminar Nasional Sains & Teknologi Informasi (SENSASI), pp. 306–312, 2019.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2022 Evan Febrianto
This work is licensed under a Creative Commons Attribution 4.0 International License.
Hak cipta pada setiap artikel adalah milik penulis.
Penulis mengakui bahwa INSOLOGI (Jurnal Sains dan Teknologi) sebagai publisher yang mempublikasikan pertama kali dengan lisensi Creative Commons Attribution 4.0 International License.
Penulis dapat memasukan tulisan secara terpisah, mengatur distribusi non-ekskulif dari naskah yang telah terbit di jurnal ini kedalam versi yang lain, seperti: dikirim ke respository institusi penulis, publikasi kedalam buku, dan lain-lain. Dengan mengakui bahwa naskah telah terbit pertama kali pada INSOLOGI (Jurnal Sains dan Teknologi).
